Held gloves- why they fit like a glove should!

Held gloves. Many awards, huge amounts of great feedback. Here's how they are made. Here's why they're good! You can, of course, get your Held gloves from Held's largest UK retailer- GetGeared! Click here

Grading

Every single piece of cowhide, kangaroo pelt and stingray skin is checked by hand – often by Erhard Held or his son Christian Held personally. Hides are very rarely perfect, but any faults such as marks from barbed wire, thorns or ticks are identified and the piece rejected. The leather is then soaked so that it can be stretched for punching, to ensure that the finished items will not lose its shape with use.

Punching


All Held gloves are punch cut. This is far more precise and provides a cleaner edge than cutting with scissors. A costly, sharpened metal die must be fabricated for each leather section. And when you consider that a pair of Held Phantom gloves has 156 individual sections, this means we need a lot of cutters! It then takes 18 minutes to punch out each pair.

Moulding

We only use carbon fibre of the highest grade, which we punch-cut and pressure mould ourselves to ensure a perfect fit. Once cut, each piece is heated to 450˚C and then subjected to 40 tons of pressure and shaped over our custom moulds. These custom protectors are often underlain with shock absorbing gel and sometimes even overlaid with Titanium.

Stitching

Each pair of gloves take a highly skilled machinist 90 minutes of sewing time.

Finishing

Finally every single Held glove is carefully formed on hot irons to create the perfect ergonomic fit. Once this is achieved, the material and workmanship of each one is carefully inspected. If even the slightest irregularity is detected, the glove will be rejected.

There! Hope you found that interesting. If you'd like your own pair of Held gloves please visit www.GetGeared.co.uk 

Pics: c Held GmbH; schöffel design

c Held GmbH; schöffel design